Pneumatics for electronics and precision assembly.
Small assembly and test stations often need short actuator travel, an accessible pressure setting and clear pressure feedback. Match the circuit to the fixture and process instead of choosing components by port size alone.
Where pneumatics fit.
Compact fixture movements
Short-body actuators can move locating pins, stops or clamps where space is limited. Check the required stroke and the clearance around the moving mechanism.
Pressure adjustment
A precision regulator allows fine adjustment of the pneumatic circuit. Define the required pressure range and flow for the connected device.
Pressure monitoring
A pressure switch can provide a display and electrical signal to the machine controls. Specify the input range and output type that the controller expects.
Components to consider.
Explore the product range, then check the model specifications for your circuit.
HIR precision regulators
Set circuit pressure
HIR provides fine pressure adjustment with separate pilot and main vents. Choose the body size, setting range and control configuration.
HCQ2 compact cylinders
Fit short linear motions
HCQ2 provides double-acting motion in a short body. Check the bore, stroke, mounting and rod-end thread against the fixture drawing.
NP pressure switches
Read pressure and signal status
NP combines a dual-screen display with selectable outputs. Match the pressure-input range, media version and electrical output to the circuit.
Other air preparation options.
- HDAFM mist separators
For a circuit that requires mist filtration, compare the HDAFM30/40 processing limits and initially filtered inlet-air requirement. Confirm the fixture air-quality specification separately.
Before you choose.
Use these details to narrow the selection with XMC.
- Pressure requirement
- Supply pressure, working setting range and the process tolerance.
- Fixture dimensions
- Stroke, bore, mounting holes and clearance around the actuator.
- Control signals
- Required switch or analog output, wiring and controller input type.
- Process conditions
- Air quality, ambient conditions and sensitivity of the workpiece.
Guides for this application.
Talk through your application.
Send the fixture dimensions, pressure requirement, actuator travel, controller inputs and quantity.