HA Series Air Preparation Units
HA Series prepares compressed air with filtration, pressure regulation and lubrication. The filter drain has a push-in connection for routing condensate to a collection point.
- Push-in drain connection for condensate tubing
- Filter, regulator and lubricator assembly options
HAC3000 · HAC3000 combinations. Selected specifications are shown below.
21 June 2025 edition · Printed pages 24–28 · 3.8 MB. The PDF contains the original catalogue information, ordering references and available drawings for this series.
Open the 21 June 2025 catalogueSelected specifications.
HAC3000 · HAC3000 combinations.
Your selected reference will be included in the inquiry. See the product documents for configuration details.
| Port options | G1/4 or G3/8 |
|---|---|
| Rated flow | 2,000 L/min at 0.7 MPa inlet and 0.5 MPa set pressure |
| Maximum working pressure | 1.0 MPa |
| Ambient and fluid temperature | 5 to 60 °C |
| Filter element | 25 µm standard; 5 µm and 50 µm options |
| Pressure regulating range | 0.05 to 0.85 MPa |
| Bowl material | Polycarbonate |
| Recommended lubricating oil | Turbine No. 1 oil, ISO VG 32 |
Compare HA models.
Swipe to view the full comparison.
| Model | Port options | Rated flow |
|---|---|---|
| HAC2000 | G1/8 or G1/4 | 500 L/min at 0.7 MPa inlet and 0.5 MPa set pressure |
| HAC3000 | G1/4 or G3/8 | 2,000 L/min at 0.7 MPa inlet and 0.5 MPa set pressure |
| HAC4000 | G3/8, G1/2 or G3/4 | 4,000 L/min; G3/4 version: 4,500 L/min (0.7 MPa inlet, 0.5 MPa set) |
| HAC5000 | G3/4 or G1 | 5,000 L/min at 0.7 MPa inlet and 0.5 MPa set pressure |
Match the combination to the machine
HAC combines filtration, pressure regulation and lubrication. Compare the connection sizes and rated flows in the table, then check whether the downstream components require added lubrication before specifying the assembly.
Confirm fittings, bowl access and accessories
Check the exact model, drain arrangement, gauge and mounting details against the product PDF. Allow space below the bowls for drainage and maintenance. The rated flow is tied to the stated inlet and set pressures; confirm performance at the machine's actual conditions.
View ordering codes and dimension drawings in the HA PDF · Printed pages 24–28
Questions about HA.
Selection, installation and care for this product range.
How do I choose between HAC2000, HAC3000, HAC4000 and HAC5000?
Compare the port options and flow ratings in the model table, then check the machine's working pressure, demand and available space. The ratings use the inlet and set-pressure conditions printed alongside them; do not select by port size alone.
Does an HAC combination include lubrication?
Yes. HAC combines a filter, regulator and lubricator. Confirm that downstream equipment requires oil-mist lubrication before specifying the combination; otherwise discuss a filtration and regulation arrangement with XMC.
Which filter and oil specifications are listed for HA?
The reviewed HA specifications list 25 µm filtration as standard, with 5 µm and 50 µm options, and recommend Turbine No. 1 oil, ISO VG 32, for lubrication. Confirm the chosen components and the downstream equipment's lubrication requirements before ordering.
One series.
One document.
Download the catalogue pages for this series, including ordering references, specifications and available dimension drawings. Keep the original-resolution PDF with your project documents.
Make it fit your application.
Share your operating conditions, installation space and expected quantity. Your selected reference will be included in the inquiry form.
Start a technical conversationExplore the air preparation range.
Continue browsing components in this product family.
View this family